Anritsu MS2080A Spectrum Analyzer, 9 kHz to 4 GHz
Request a quote
Anritsu MS2080A is a portable spectrum analyzer covering 9 kHz to 4 GHz with real-time analysis, interference hunting, and 5G/LTE base station measurement capabilities.
Product details
| Model | MS2080A |
| Manufacturer | Anritsu |
| Category | Spectrum Analyzers |
| Availability | Made to order |
Description
Overview
The Anritsu MS2080A is a handheld spectrum analyzer designed for demanding RF measurements in field and laboratory environments. Weighing less than 9 pounds (4 kg) with a comprehensive feature set integrated into one instrument, the MS2080A combines spectrum analysis, real-time spectrum analysis (RTSA), cable and antenna analysis, and LTE/5G base station testing capabilities. With over 20 years of development experience, the MS2080A delivers reliable performance in the toughest environments.
Key Features
- Spectrum analyzer with 9 kHz to 4 GHz coverage
- Real-time spectrum analyzer (RTSA) with 40 MHz bandwidth
- Fast sweep speed of 45 GHz/s for rapid interference identification
- Interference analyzer with source triangulation
- True power meter functionality
- Cable and antenna analyzer (with optional S331P Site Master)
- AM/FM demodulation with audio output
- LTE FDD/TDD signal analyzer
- 5GNR FR1 measurements per 3GPP TS 38.104
- Coverage mapping for 5G/LTE signal visualization
- Dynamic range exceeding 105 dB at 2.4 GHz
Applications
- Interference hunting and spectrum clearing
- Broadcast transmitter analysis and compliance verification
- 5G NR base station measurement and validation
- LTE/5G network coverage mapping and optimization
- RF cable and antenna line sweep testing
- General-purpose RF lab and field measurements
Specifications
| Interference Hunting and Spectrum Clearing | fast sweep speeds a low distortion front-end and the Real Time spectrum analyzer combine to quickly identify interfering signals. A special interference finder option adds AM/FM demodulation with audio output plus interfering source triangulation on a digital map to pinpoint and identify the location and source of interference. |
| Broadcast Transmitter Analysis | a comprehensive range of transmitter measurements; including: harmonic, spurious, occupied bandwidth, channel power, and adjacent channel power – ensures conformity to regulatory requirements |
| 5GNR Base Station Measurement | validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15. including: ▪ frequency error ▪ time offset ▪ cell/sector ID ▪ SSB: RSRP, RSRQ, SINR, RSSI ▪ modulation quality EVM ▪ unwanted emissions ▪ occupied bandwidth ▪ adjacent channel leakage ratio ▪ transmitter harmonics and spurious ▪ EIRP |
| 5G/LTE Coverage Mapping | receive a clear representation of the signal strength of 5G/LTE transmitters over intended geographic area by continuously measuring RF data – including RSRP, RSRQ, SINR, channel power – with results graphically displayed on a digital map or building floor plan. |
| Cable and Antenna Measurements | Line sweep RF cables and antennas at base station locations with accessory S331P Site Master |
| Feature | Parameter |
| Frequency Range | 9 kHz to 4 GHz |
| Sweep Speed | 45 GHz/s |
| Phase Noise | -95 dBc/Hz @ 1 GHz freq and 100 kHz offset |
| DANL | < -165 dBm (with pre amp) |
| Maximum Input Signal | +30 dBm |
| Dynamic Range | >105 dB minimum at 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW |
| Amplitude Range | DANL to +30 dBm |
| Input Damage Level | 5 Watts |
| Frequency Accuracy | Aging: ±1.0 x 10–6 per 10 years Accuracy: ±0.28 x 10–6 (-10 °C ± 55°C) plus aging |
| Amplitude Accuracy | ±1 dB (± 0.5 dB typical) |
| Resolution Bandwidth in Sweep Mode | 1 Hz to 5 MHz |
| Resolution Bandwidth in Zero Span | 10 Hz to 20 MHz |
| RTSA Bandwidth | 40 MHz |
| Demodulation | 5GNR base station, LTE base station |
| MS2080A | Field Master Spectrum Analyzer (Requires Option 704) |
Request a quote
Anritsu MS2080A Spectrum Analyzer, 9 kHz to 4 GHz
Response within 24 hours
No obligation
Direct communication