Keysight N9914A FieldFox Handheld Microwave Analyzer
Request a quote
Handheld microwave analyzer with 6.5 GHz frequency combining cable/antenna, VNA, and spectrum analysis capabilities in a 3 kg portable package.
Product details
| Model | N9914A |
| Manufacturer | Keysight |
| Category | Cable & Antenna Analyzers |
| Availability | Made to order |
Description
Overview
The Keysight N9914A FieldFox is a handheld microwave combination analyzer that combines cable and antenna analysis with optional spectrum and network analysis capabilities. Designed for field maintenance and troubleshooting, it delivers Keysight-quality measurements in a portable 6.6 lb (3.0 kg) handheld package.
Key Features
- 6.5 GHz maximum frequency
- Standard cable and antenna analyzer with optional Vector Network Analyzer and spectrum analyzer
- DTF and TDR cable measurements in the same sweep
- Simultaneous measurement of all four S-parameters
- Spectrum analyzer accuracy of ±0.5 dB with no warm-up required
- QuickCal simple calibration
- Lightweight 6.6 lb (3.0 kg) design
- Optional power meter, vector voltmeter, signal generator, and interference analyzer
Applications
- Cable and antenna analysis
- Field strength measurement
- Spectrum analysis and monitoring
- Network analysis and characterization
- Cellular and 5G equipment testing
- Wireless connectivity assessment
Specifications
| Features | Parameters |
| Maximum Frequency | 6.5 GHz |
| Minimum Frequency | 30 kHz |
| SA Start Frequency | 5 kHz |
| System Dynamic Range | 100 dB |
| Best Speed at 1001 Point, 1 Sweep | 432 us/pt |
| Output Power | -1 dBm |
| Trace Noise | 0.004 dB |
| Number of Built-In Ports | 2 ports |
| Instrument Type | Combination Analyzer |
| Cable and Antenna Analyzer | Yes - Standard |
| Spectrum Analyzer | Yes - Optional |
| Vector Network Analyzer | Yes - Optional |
| Additional CAT/VNA Based Features | Vector Voltmeter Mixed-Mode S-Parameters DTF/TDR Cable Measurements |
| Additional SA Based Features | Built-In Power Meter Extended Range Transmission Analysis (ERTA) Real-Time Spectrum Analysis Noise Figure Measurements Over-The-Air Measurements |
| System Features | Built-In DC Source GPS Receiver - Internal Only Remote Control Capability |
| Power Measurement Using USB Sensor | CW or Swept-Frequency Frequency-Offset RF Pulse Test with Peak Sensor |
| Standard Attenuator Range | 30 dB |
| Standard Attenuator Step | 5 dB |
| DANL @1 GHz | -155 dBm |
| Maximum Analysis Bandwidth | 10 MHz |
| Phase Noise @1 GHz (1 MHz offset) | -113 dBc/Hz |
| Phase Noise @1 GHz (10 kHz offset) | -111 dBc/Hz |
| Phase Noise @1 GHz (30 kHz offset) | -108 dBc/Hz |
| Spur Free Dynamic Range | > 105 dB |
| TOI @1 GHz (3rd Order Intercept) | +15 dBm |
| Applications Available | Yes |
| Maximum Real-Time Bandwidth | 10 MHz |
| Bandwidth Options | 10 MHz (standard) |
| Performance Level | ◆◆◆◇◇◇ |
| Applications-Cellular | 89600 VSA Software Over-The-Air LTE FDD and 5GTF |
| Applications-Digital Video | 89600 VSA Software |
| Applications-General Purpose | AM/FM Tune and Listen Cable and Antenna Analysis Field Strength Measurement SCPI Code Compatibility Spectrogram Stimulus Response |
| Applications-Wireless Connectivity | 89600 VSA Software |
| N9914A | 30 kHz to 6.5 GHz |
| Maximum Frequency | Combination Models (CAT + VNA + SA)Combination Models (CAT + VNA + SA)VNA ModelsVNA ModelsSA Models |
| 6/6.5 GHz | N9912A-106 (2)N9914A (3)N9923A-106 (2) |
| N9914A | 6.5 GHz FieldFox RF analyzer30 kHz to 6.5 GHz100 kHz to 6.5 GHzType-N (f) |
Request a quote
Keysight N9914A FieldFox Handheld Microwave Analyzer
Response within 24 hours
No obligation
Direct communication