EA Elektro-Automatik EA-PSB 10360-80 3U Bidirectional DC Power Supply
EA Elektro-Automatik EA-PSB 10360-80 3U bidirectional DC power supply with 360V/80A output, 10000W power, and regenerative energy recovery up to 96% efficiency.
Product details
| Model | EA-PSB 10360-80 3U |
| Manufacturer | EA Elektro-Automatik |
| Category | Bidirectional DC Supplies |
| Availability | Made to order |
Description
Overview
The EA Elektro-Automatik EA-PSB 10360-80 3U is a high-performance bidirectional DC power supply designed for demanding laboratory and industrial applications. With three-phase AC input (208–480V) and a 3U rackmount form factor, this unit delivers up to 10000W of DC output at 360V, 80A. Operating as both power source and electronic load, it regenerates energy back to the AC grid with efficiency exceeding 96%, significantly reducing operational costs and cooling requirements.
This premium unit integrates a 5-inch touch-control TFT display, advanced 16-bit digital regulation with selectable control speeds, and flexible autoranging output stages. It provides comprehensive testing capabilities including battery simulation, fuel cell emulation, photovoltaic system modeling, and automotive test procedures. The Master-Slave bus enables stacking up to 64 units for systems reaching 640 kW, with each unit contributing full 15 kW performance.
Key Features
- High-power bidirectional operation: 10000W maximum output
- Regenerative energy recovery with up to 96% efficiency
- Output: 360 VDC, 80 ADC, 10000W maximum
- Three-phase AC input: 208–480V, ±10%
- Active Power Factor Correction (typical 0.99)
- High performance: up to 15 kW per unit
- Flexible autoranging output stages for constant power operation
- CV, CC, CP, CR regulation modes with fast crossover
- 5-inch color TFT display with touch control interface
- Selectable control speed: Normal, Fast, Slow modes
- Integrated function generator with multiple waveforms
- Battery characterization and fuel cell simulation modes
- Photovoltaic (MPPT) simulation with EN 50530 compliance
- Predefined automotive procedures: LV123, LV124, LV148
- Advanced communications: SCPI, ModBus, LabVIEW, IVI, USB, Ethernet
- 16-bit ADC/DAC digital regulation with high resolution
- Galvanically isolated Share-Bus and Master-Slave bus for parallel operation
Applications
- High-power electronic load testing
- Large battery pack characterization and cycling
- Industrial power conversion testing and validation
- Automotive electrical system stress testing
- Renewable energy integration and grid simulation
- Multi-unit high-power systems up to 640 kW
Included Accessories
- 1 × Bidirectional power supply device
- 2 × Remote sensing plugs
- 1 × 1.8 m USB cable
- 1 × Set of DC terminal covers
- 1 × Sense terminal cover
- 1 × USB stick with documentation and software
- 1 × AC connector plug (clamp type)
- 1 × Set for AC cable strain relief
Specifications
| Maximum Power | 10 kW |
| Output Voltage | 360 V |
| Output Current | 80 A |
| Input Voltage | 208-480 VAC |
| Interface | USB, Ethernet (100 MBit) for communication, 1 x USB Host for Data Acquisition |
| Display | 5 TFT Color Touch |
| Series | EA-PSB 10000 3U Series |
| Current Accuracy | ≤0.1% FS |
| Current Range Selector | 50-99.9 |
| Dimensions | 19 x 5.25 x 30.6" |
| Frequency Range | 45-65 Hz |
| IP Rating | IP20 |
| Mounting Type | Rack Mount |
| Number of Outputs | Single Output |
| Operating Temperature Range | 32-122°F |
| Power Range Selector | 10,000-19,999 |
| Relative Humidity Range | ≤80% |
| Resistance Range | 0.15-260 Ω |
| Safety | EN 61010-1 IEC 61010-1 UL 61010-1 CSA C22.2 No 61010-1 BS EN 61010-1 |
| Storage Temperature | -4-158°F |
| Type | Programmable Bi-Directional DC Power Supply |
| Voltage Accuracy | ≤0.05% FS |
| Voltage Range Selector | 300-499 |
Request a quote
EA Elektro-Automatik EA-PSB 10360-80 3U Bidirectional DC Power Supply