EA Elektro-Automatik EA-PSB 10060-170 3U Bidirectional DC Power Supply
Request a quote
EA Elektro-Automatik EA-PSB 10060-170 3U is a high-power bidirectional DC supply with 60V, 170A output (5000W), three-phase input (208–480V), energy recovery, and integrated testing functions.
Product details
| Model | EA-PSB 10060-170 3U |
| Manufacturer | EA Elektro-Automatik |
| Category | Bidirectional DC Supplies |
| Availability | Made to order |
Description
Overview
The EA Elektro-Automatik EA-PSB 10060-170 3U is a high-power bidirectional programmable DC supply for demanding laboratory and industrial applications. Operating with three-phase AC input (208–480V), it delivers 60V at 170A (5000W peak power) and functions as both source and load with energy recovery exceeding 96% efficiency. The 3U rackmount form factor is designed for integration into high-power test systems.
Key Features
- Output: 60V DC, 170A, 5000W maximum
- Three-phase input: 208V–480V +10% AC with active power factor correction
- Bidirectional operation: source and sink with regenerative energy recovery to grid (>96% efficiency)
- Autoranging output stage for flexible voltage and current control within constant power envelope
- Regulation modes: CV (constant voltage), CC (constant current), CP (constant power), CR (constant resistance) with fast crossover
- Selectable control speed: Normal, Fast, Slow with 16-bit ADC/DAC digital regulation
- 5-inch color TFT touchscreen with intuitive user interface
- Integrated function generator: sine, triangle, square, trapeze, ramp, and arbitrary waveforms
- Battery and fuel cell simulation with integrated battery test mode
- Photovoltaic (PV) test mode with MPPT and EN 50530 standard compliance
- Master-Slave bus: up to 64 units in parallel for scaled power up to 960 kW and current up to 64,000A
- Galvanically isolated interfaces: USB, Ethernet, analog, and optional CAN, CANopen, RS232, Profibus, EtherCAT, Profinet, Modbus
- Predefined automotive test procedures (LV123, LV124, LV148)
- SCPI, ModBus, LabVIEW, and IVI driver support
Applications
- High-power battery and energy storage system testing
- Fuel cell and fuel cell stack characterization
- Photovoltaic system design and verification
- High-current automotive and industrial component testing
- Power electronics development and validation
- Multi-unit systems for increased power and current requirements
Included Accessories
- Remote sensing plugs (×2)
- USB cable (1.8 m)
- DC terminal covers and sense terminal cover
- AC connector plug (clamp type)
- AC cable strain relief set
- USB stick with documentation and software (EA Power Control, EA Battery Simulator)
Specifications
| Maximum Power | 5 kW |
| Output Voltage | 60 V |
| Output Current | 170 A |
| Input Voltage | 208-480 VAC |
| Interface | USB, Ethernet (100 MBit) for communication, 1 x USB Host for Data Acquisition |
| Display | 5 TFT Color Touch |
| Series | EA-PSB 10000 3U Series |
| Current Accuracy | ≤0.1% FS |
| Current Range Selector | 100-199 |
| Dimensions | 19 x 5.25 x 30.6" |
| Frequency Range | 45-65 Hz |
| IP Rating | IP20 |
| Mounting Type | Rack Mount |
| Number of Outputs | Single Output |
| Operating Temperature Range | 32-122°F |
| Power Range Selector | 5,000-9,999 |
| Relative Humidity Range | ≤80% |
| Resistance Range | 0.016-26 Ω |
| Safety | EN 61010-1 IEC 61010-1 UL 61010-1 CSA C22.2 No 61010-1 BS EN 61010-1 |
| Storage Temperature | -4-158°F |
| Type | Programmable Bi-Directional DC Power Supply |
| Voltage Accuracy | ≤0.05% FS |
| Voltage Range Selector | 50-99.9 |
Request a quote
EA Elektro-Automatik EA-PSB 10060-170 3U Bidirectional DC Power Supply
Response within 24 hours
No obligation
Direct communication