EA Elektro-Automatik EA-PSB 10060-510 3U Bidirectional DC Power Supply
Request a quote
EA Elektro-Automatik EA-PSB 10060-510 3U bidirectional DC supply with 60V/510A output, 15kW capacity, energy recovery to grid, and advanced test functions for battery and power electronics testing.
Product details
| Model | EA-PSB 10060-510 3U |
| Manufacturer | EA Elektro-Automatik |
| Category | Bidirectional DC Supplies |
| Availability | Made to order |
Description
Overview
The EA-PSB 10060-510 3U is a programmable bidirectional DC power supply from the PSB 10000 series. This two-quadrant device functions as both a power supply and electronic load, with regenerative capability that recovers energy back to the grid at over 96% efficiency. It is designed for demanding laboratory and industrial testing applications.
Key Features
- Output: 60V, 510A, 15kW with flexible autoranging capability
- Wide input: 208-480V ±10% three-phase AC with active power-factor correction
- Bidirectional operation: source and sink modes with energy recovery to grid
- Regulation modes: CV, CC, CP, CR with fast crossover
- Color 5" TFT touch display with intuitive user interface
- 16-bit ADCs and DACs with selectable control speeds (Normal, Fast, Slow)
- Integrated function generator with predefined waveforms (sine, triangle, square, trapeze, ramp)
- Automotive test procedures: LV123, LV124, LV148 compliance
- Battery test mode, fuel cell simulation, and MPPT photovoltaic simulation (EN 50530)
- Master-Slave and Share-Bus for parallel operation of up to 64 units
- Communication: SCPI, ModBus, LabVIEW, IVI drivers
- Interfaces: USB, Ethernet, Analog, CAN, CANopen, RS232, Profibus, EtherCAT, Profinet, Modbus
Applications
- Battery testing for electric mobility (cell, module, pack, SOH assessment)
- On-board charger (OBC) testing with dynamic load profiles
- Battery and fuel cell simulation
- Solar array and photovoltaic inverter testing
- Fuel cell performance and longevity testing
- Battery recycling and state-of-health determination
- High-power multi-unit systems up to 1920 kW
Included Accessories
- 1x bidirectional power supply device
- 2x remote sensing plugs
- 1x 1.8m USB cable
- 1x DC terminal covers set
- 1x sense terminal cover
- 1x USB stick with documentation and software
- 1x AC connector plug (clamp type)
- 1x AC cable strain relief set
Specifications
| Maximum Power | 15 kW |
| Output Voltage | 60 V |
| Output Current | 510 A |
| Input Voltage | 208-480 VAC |
| Interface | USB, Ethernet (100 MBit) for communication, 1 x USB Host for Data Acquisition |
| Display | 5 TFT Color Touch |
| Series | EA-PSB 10000 3U Series |
| Current Accuracy | ≤0.1% FS |
| Current Range Selector | 500-1,499 |
| Dimensions | 19 x 5.25 x 30.6" |
| Frequency Range | 45-65 Hz |
| IP Rating | IP20 |
| Mounting Type | Rack Mount |
| Number of Outputs | Single Output |
| Operating Temperature Range | 32-122°F |
| Power Range Selector | 10,000-19,999 |
| Relative Humidity Range | ≤80% |
| Resistance Range | 0.006-9 Ω |
| Safety | EN 61010-1 IEC 61010-1 UL 61010-1 CSA C22.2 No 61010-1 BS EN 61010-1 |
| Storage Temperature | -4-158°F |
| Type | Programmable Bi-Directional DC Power Supply |
| Voltage Accuracy | ≤0.05% FS |
| Voltage Range Selector | 50-99.9 |
Request a quote
EA Elektro-Automatik EA-PSB 10060-510 3U Bidirectional DC Power Supply
Response within 24 hours
No obligation
Direct communication