EA Elektro-Automatik EA-PSB 10360-30 2U Bidirectional DC Power Supply
EA Elektro-Automatik EA-PSB 10360-30 2U bidirectional DC power supply with 360V/30A output, 3000W power, and regenerative energy recovery up to 95% efficiency.
Product details
| Model | EA-PSB 10360-30 2U |
| Manufacturer | EA Elektro-Automatik |
| Category | Bidirectional DC Supplies |
| Availability | Made to order |
Description
Overview
The EA Elektro-Automatik EA-PSB 10360-30 2U is a programmable bidirectional DC power supply that operates as both a source and load. In load mode, the device regenerates energy back into the AC mains with efficiency up to 95%, reducing operational costs and heat generation. The 2U rackmount form factor accommodates single-phase AC input (110–240V) and delivers up to 3000W of DC output at 360V, 30A.
This unit is equipped with advanced features including a 5-inch touch-control TFT display, 16-bit digital regulation, and flexible autoranging output stages that maintain full power across wide voltage and current ranges. Multiple units can be paralleled using the integrated Master-Slave bus to combine up to 64 devices for systems exceeding 1920 kW.
Key Features
- Bidirectional operation: functions as both power supply and electronic load
- Regenerative energy recovery with up to 95% efficiency
- Output: 360 VDC, 30 ADC, 3000W maximum
- Single-phase AC input: 110–240V, ±10%
- Active Power Factor Correction (typical 0.99)
- Flexible autoranging output stages for constant power operation
- Regulation modes: CV (constant voltage), CC (constant current), CP (constant power), CR (constant resistance)
- 5-inch color TFT display with touch control interface
- Integrated function generator with sine, triangle, square, and trapeze waveforms
- Battery and fuel cell simulation modes
- Photovoltaic (MPPT) simulation with EN 50530 standard curves
- Predefined automotive test procedures (LV123, LV124, LV148)
- Multiple communication interfaces: USB, Ethernet, SCPI, ModBus, LabVIEW, IVI
- 16-bit ADC/DAC digital regulation with selectable control speed
- Galvanically isolated Share-Bus and Master-Slave bus for parallel operation
Applications
- Electronic load testing for power supplies and battery chargers
- Battery and fuel cell testing and characterization
- Solar panel and photovoltaic system simulation
- Automotive electrical system testing (LV123/LV124/LV148 procedures)
- DC power distribution system development and validation
- Energy efficiency studies with regenerative load operation
Included Accessories
- 1 × Bidirectional power supply device
- 2 × Remote sensing plugs
- 1 × 1.8 m USB cable
- 1 × Set of DC terminal covers
- 1 × Sense terminal cover
- 1 × USB stick with documentation and software
- 1 × Cable tie for strain relief
Specifications
| Maximum Power | 3 kW |
| Output Voltage | 360 V |
| Output Current | 30 A |
| Input Voltage | 110-240 VAC |
| Interface | USB, Ethernet (100 MBit) for communication, 1 x USB Host for Data Acquisition |
| Display | 5 TFT Color Touch |
| Series | EA-PSB 10000 2U Series |
| Current Accuracy | ≤0.1% FS |
| Current Range Selector | 30-49.9 |
| Dimensions | 19 x 3.5 x 22" |
| Frequency Range | 45-65 Hz |
| IP Rating | IP20 |
| Mounting Type | Rack Mount |
| Number of Outputs | Single Output |
| Operating Temperature Range | 32-122°F |
| Power Range Selector | 2,500-4,999 |
| Relative Humidity Range | ≤80% |
| Resistance Range | 0.4-800 Ω |
| Safety | EN 61010-1 IEC 61010-1 UL 61010-1 CSA C22.2 No 61010-1 BS EN 61010-1 |
| Storage Temperature | -4-158°F |
| Type | Programmable Bi-Directional DC Power Supply |
| Voltage Accuracy | ≤0.05% FS |
| Voltage Range Selector | 300-499 |
Request a quote
EA Elektro-Automatik EA-PSB 10360-30 2U Bidirectional DC Power Supply