Keysight N9928AU/112 QuickCal Calibration Option
Request a quote
QuickCal calibration option enables field calibration without mechanical standards, correcting for phase shift, delay, and loss of adapters or jumper cables.
Product details
| Model | N9928AU/112 |
| Manufacturer | Keysight |
| Category | Analyzer Options & Accessories |
| Availability | Made to order |
Description
Overview
The N9928AU/112 QuickCal option provides hassle-free field calibration for network analysis without requiring mechanical calibration standards. This option is ideal for quick and simple calibration when using jumper cables or adapters to connect devices under test to the FieldFox analyzer test ports. QuickCal automatically corrects for phase shift, time delay, and loss introduced by adapters or jumper cables.
Key Features
- No mechanical standards required
- Fast, simple field calibration procedure
- Automatic correction for phase shift and time delay
- Automatic correction for adapter and cable loss
- Ideal for Type-N and 7/16 DIN connectors
Applications
- Field service and on-site measurements
- Quick network analysis with adapter-connected devices
- Rapid device characterization in field environments
Important Notes
- Most accurate with Type-N and 7/16 DIN connectors
- 7/16 connectors supported only to 6 GHz; Type-N 75 Ohm to 3 GHz
- Not recommended for 3.5 mm or SMA connectors
- Cannot be used with waveguides or with attenuators in test setup
- Not applicable to N995x/6xA models
Specifications
| Series | FieldFox Series |
Request a quote
Keysight N9928AU/112 QuickCal Calibration Option
Response within 24 hours
No obligation
Direct communication