BSL Equipment
Home / Power Supplies & Electronic Loads / Sorensen SGX250X60D-R Programmable DC Power Supply

Sorensen SGX250X60D-R Programmable DC Power Supply

Sorensen · Model: SGX250X60D-R Made to order
Sorensen SGX250X60D-R Programmable DC Power Supply
Request a quote

Sorensen SGX250X60D-R is a 15kW modular programmable DC power supply with 250V/60A output, featuring high power density in 3U form factor and touchscreen control.

Model SGX250X60D-R
Manufacturer Sorensen
Category Power Supplies & Electronic Loads
Availability Made to order

Overview

The Sorensen SGX Series represents the next generation of high-power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise, and the highest power density in the industry. This 15kW model operates at 250V with 60A capacity in a 3U form factor, enhanced by a stylish front air intake that allows units to be stacked without required clearance.

The SGX250X60D-R is built on a modular 5kW power module architecture. This configuration provides high power density with advanced touchscreen control, LXI Ethernet connectivity, and optional GPIB interface for remote control and monitoring.

Key Features

  • 15 kW output power at 250V, 60A capacity
  • High power density: full 15kW in 3U package
  • Fast load transient response with protection from voltage excursions
  • Low ripple and noise output
  • Intuitive touchscreen display for control and monitoring
  • Modular design with flexible configuration options
  • Parallelable up to 150 kW for higher power requirements
  • LXI Ethernet, RS-232, and optional GPIB control interfaces
  • Temperature-controlled variable speed fans for low audible noise

Applications

  • Burn-in testing
  • Compliance testing
  • Materials research
  • Process control
  • Product validation
  • Automotive electronics testing
  • Rackmount ATE systems
  • Battery charging
Remote Sense Terminals are provided to sense output voltage at point of load. Maximum line drop 5% of rated voltage per line for 40 - 100V models, line drop 1V of rated voltage per line for 10-20V models, 1.5V for 30V models, 2% of rated voltage per  line for models 160V and greater. (Greater line drop is allowed, but output regulation specifications no longer apply).
Parallel Operation Up to 5 units may be paralleled for additional current within the power supply single-unit specifications, with exception of the DC output current set accuracy. Additional paralleled SG units will add 0.3% inaccuracy per unit.
Series Operation Up to 2 units
Feature Parameter
Frequency 47 – 63Hz, 400Hz (400Hz @ 208VAC, for 6U units is optional modification and does not carry CE, UL or CSA markings)
Width 3U Models (10V - 30V): 19.00 in (48.3 cm) 3U Models (40V - 1000V): 19.00 in (48.3 cm) 6U Models (60V - 600V): 19.00 in (48.3 cm)
Depth 3U Models (10V - 30V): 28.0 in (71.1 cm) 3U Models (40V - 1000V): 26.3 in (66.8 cm) 6U Models (60V - 600V): 27.1 in (68.8 cm)
Height 3U Models (10V - 30V): 5.25 in (13.3 cm) 3U Models (40V - 1000V): 5.25 in (13.3 cm) 6U Models (60V - 600V): 10.5 in (26.7 cm)
Weight 3U Models (10V - 30V): (4kW, 10V 15V) ≈<65 lbs (29 kg) (5kW, 20V 30V) ≈<65 lbs (29 kg) (8kW, 10V 15V) ≈<85 lbs (39 kg) (10kW, 20V 30V) ≈<85 lbs (39 kg) (12kW, 10V 15V) ≈<110 lbs (50kg) (15kW, 20V 30V) ≈<110 lbs (50kg) 3U Models (40V - 1000V): (5kW) ≈ ≤60 lbs (27 kg) (10kW) ≈ ≤75 lbs (34 kg) (15kW) ≈≤90 lbs (41 kg) 6U Models (60V - 600V): (20kW) ≈ ≤140 lbs (64 kg) (25kW) ≈ ≤155 lbs (71 kg) (30kW) ≈≤170 lbs (78 kg)
Operating Temperature 0 to 50ºC
Storage Temperature -25º C to 65º C
Humidity Range Relative humidity up to 95% non-condensing, 0º C – 50º C
Altitude Operating full power available up to 5,000ft. (~1,500m), derate 10% of full power for every 1,000 feet higher; non-operating to 40,000 ft. (~12,000 m)
Cooling Front and side airinlet,rear exhaust. Temperature controlled, variable speed fans. Units may be stacked without spacing.
Regulatory Certified to UL/CSA 61010 and IEC/EN 61010-1 by a NRTL, CE Compliant, Semi-F47 Compliant. LVD Categories: Installation Category II: Pollution Degree 2; Class II Equipment: for Indoor Use Only, back panel not user accessible. EMC Directive, EN 61326:1998
Modular Design ▪▪
Fast Load Transient ▪▪
Parallelable ▪▪
Analog & Digital Summing ▪▪
Direct Front Panel V/I Control ▪▪
Touch Screen
Sequencing ▪▪
Save/Recall Setups ▪▪
System Power Readouts ▪▪
Constant Power Mode ▪▪
RS-232C StandardStandard
LXI Class C Ethernet StandardOptional
GPIB OptionalOptional
Sorensen SGX250X60D-R Programmable DC Power Supply

Request a quote

Sorensen SGX250X60D-R Programmable DC Power Supply

Response within 24 hours
No obligation
Direct communication

By submitting this form, you agree to the processing of your personal data in accordance with our privacy policy.