NH Research 9300-100-TP Battery Test System
NH Research 9300-100-TP is a 100kW bidirectional battery test system with regenerative >90% efficiency, integrated touch panel, scalable to 2.4MW, and LabVIEW drivers.
Product details
| Model | 9300-100-TP |
| Manufacturer | NH Research |
| Category | Power Supplies & Electronic Loads |
| Availability | Made to order |
Description
Overview
The NH Research 9300-100-TP is a high-power, bidirectional DC battery test system and emulator with integrated touch panel interface for simplified operation. It delivers 100kW of power per cabinet with scalable architecture supporting up to 2.4MW when parallel connected. This advanced system combines rapid transient response with regenerative technology, returning greater than 90% of discharge power back to the AC facility mains for significant electrical savings.
Supporting both source (charge) and load (discharge) modes with sub-millisecond transitions, the 9300-100-TP enables precise simulation of real-world battery behavior and complete charge/discharge cycling. It features hardware battery emulation, comprehensive software tools including LabVIEW support, and optional Enerchron test executive for automated test sequence execution.
Key Features
- 100kW power per cabinet with dual voltage ranges: 600V/333A or 1200V/167A
- Bidirectional operation: regenerative DC source/load with >90% efficiency
- Integrated touch panel for direct equipment control
- Modular, scalable architecture: parallel up to 24 cabinets for 2.4MW/8000A
- Fast mode transitions: voltage, current, and control mode switching in less than 2 milliseconds
- Hardware battery emulation with OCV and series resistance simulation
- Built-in digital measurements with charting and oscilloscope-style displays
- PC-based SoftPanel GUI with remote control capability
- LabVIEW and IVI drivers for test automation
- Optional Enerchron test executive for test sequencing
Applications
- High-voltage electric vehicle battery module and pack testing
- Battery life-cycle and charge/discharge cycling
- Battery charger and on-board charger (OBC) testing
- EV powertrain and drive cycle simulation
- Energy storage and renewable energy system testing
- Fuel cell and ultra-capacitor evaluation
- Solar PV inverter and DC charger testing
- Aerospace and critical power industry applications
- Battery management system (BMS) testing and failure simulation
- Standards certification laboratory applications
Specifications
| Power Rating | 100 kW per cabinet |
| Scalable Power | Up to 2.4 MW (24 units in parallel) |
| Scalable Current | Up to 8,000 A |
| Voltage Range 1 | 1200 V @ 167 A |
| Voltage Range 2 | 600 V @ 333 A |
| Operation Modes | Bidirectional DC source and load |
| Regenerative Efficiency | >90% power return to mains |
| Mode Transition Time | < 2 milliseconds |
| Battery Emulation | Hardware with OCV and series resistance |
| Control Interface | Integrated touch panel and PC SoftPanel |
| Software Drivers | LabVIEW and IVI-C/IVI-COM |
| Optional Software | Enerchron Test Executive |
Request a quote
NH Research 9300-100-TP Battery Test System