Farnell AP100-30 Autoranging DC Power Supply
Request a quote
Farnell AP100-30 is a 1 kW autoranging DC power supply with 0–100 V / 0–30 A output, constant voltage/current modes, and GPIB remote control.
Product details
| Model | AP100-30 |
| Manufacturer | Farnell |
| Category | Power Supplies & Electronic Loads |
| Availability | Made to order |
Description
Overview
The Farnell AP100-30 is a 1 kW autoranging DC power supply featuring a unique autoranging concept that provides a wide and adjustable range of voltage and current combinations within its constant power envelope. This flexible design makes it ideal for both bench and systems applications, often meeting present and future requirements with a single instrument.
Key Features
- 1 kW power envelope with 0–100 V / 0–30 A output range
- Autoranging voltage and current combinations
- Constant voltage or constant current operation modes
- Voltage step: 25 mV, programming accuracy: 0.2% + 0.13% f.s.
- Current step: 10 mA, programming accuracy: 1.1% + 0.13% f.s.
- Manual control or IEEE 488.2 (GPIB) remote interface
- Digital LED panel meters and status annunciators
- Remote sensing capability (up to 0.5 V drop compensation per lead)
- Master/slave operation for increased power or voltage
- Rack mountable enclosure
Applications
- Bench power supply for development and prototyping
- System integration for automated test equipment
- Component and subsystem testing requiring stable power
- Load testing and product validation
Specifications
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP100-30 | 25mV10mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP100-30 | 0-100V/0-30A |
Request a quote
Farnell AP100-30 Autoranging DC Power Supply
Response within 24 hours
No obligation
Direct communication